Showing posts with label crafts. Show all posts
Showing posts with label crafts. Show all posts

Tuesday, November 24, 2015

DIY Gel Air Freshener

Hoping to make your house smell wonderful but can't find the scents you want? I know right like really, there are so many candles and sprays out there. Well if you can't find one that fits you, you can always just make your own great smelling air freshener. So here is what you need to get started.

Ingredients:

  • Gelatin (4 packs, one box of knox gelatin works)
  • any essential oil fragrance (mix them up if you want 15 to 20 drops)
  • food coloring 
  • 2 tbs of salt (or more depending on concentration)
  • 2 cups of water (divided)
Instructions.

Heat a cup of boiling water on the stove top. Add your food coloring and stir until it boils. 

Once it boils take it off the heat and add in your salt and gelatin. Stir to combine (lumps will form in gelatin so make sure it melts)

After everything  dissolves add in your fragrance about 15 to 20 drops. stir.

Add the second cup of water, this should be cold, and the gelatin mixture is ready to be poured. (you may use less water in this step for a stronger concentration.)

Fill any container with the gelatin mixture and place it on the counter to solidify (up to 2 days) or in the refrigerator (up to 24 hours)

See how I did it with the video below. 


Until the world revolves again.....B

Follow me on Twitter, Instagram, Tumblr, and YouTube

Thursday, November 19, 2015

Loop Glider Science Experiment

So for some quick fun and a cool air resistance lesson, why not make a loop glider? It is basically the weirdest thing you might ever see soaring through the air, but it really works.

Here is how to make your own

Supplies


  • Index Card 3x5 in. (cut into 1x5 in strips)
  • A drinking straw (from any fast food place)
  • clear tape 
  • scissors
Instructions:

Cut the 3x5 in index card into three equal strips. They should each be 1 in by 5 inches long. You will use these pieces to make the loops.
Take one piece of index card and bend it around so that both ends meet. Cover one end over by about 1 cm so that it makes a nice circle. 

Take the two other pieces and tape them end to end and then loop one side with the other creating another nice circle. (Watch the video for visuals)

Now tape the loops onto the straw. the small loop on one side and the larger loop on the other. 

Now that you are down. Test it out and see how far it goes.


Check out the video below:

Until the world revolves again....B

Follow me on Twitter, Instagram, Tumblr and YouTube

Tuesday, November 17, 2015

DIY Burlap Garland and Moss Ornaments--More Christmas Crafts

I am continuing to create my very southern Louisiana Christmas tree. Today, I am making some very important accents for the tree with the help of burlap and moss.
Yes, that is me in the background duh! 

Burlap Garland

 My first project is the burlap garland. For this project, I used only one roll of burlap ribbon from Michaels.

The art of making these garlands is that they have to pucker in a way that makes them look full and flowing. I used a bit of yarn to create a zig-zag pattern to achieve this effect. The yarn sewing that I did is really simple and works very effectively to get a great look.

This is, however, a time-consuming process but don't worry, It looks great in the end. As a side note, you will need at least two to three rolls of burlap ribbon to create a longer piece

Moss Ornament

For the ornaments, all you are going to need is a big bag of moss, I am using the spanish moss from Michael's and some medium to large sized glass bulbs. 

Before stuffing the moss in the bulbs, I cut a few pieces with scissors to make it easier to handle. Moss can get very messy and tangled. Trust me, It goes everywhere. Once everything is ready to handle, just roll up the moss and place it in the bulb. It couldn't be any simpler. 

The end result looks great too. We will be spraying ours with a bit of fake snow to give it a winter-like affect. (We almost never get snow in South Louisiana) 


The video below will show you exactly what I am talking about:


Until the world revolves again....B

Follow me on Twitter, Instagram, Tumblr, and YouTube

Tuesday, November 3, 2015

It is Beginning to Look A Lot Like...DIY Christmas Projects: Plastic Spoon Flowers

So Halloween has officially ending and it is now time to think about Turkey...just kidding, it is time for Christmas!!

So I know that thanksgiving hasn't even made its way to the U.S. just yet but I mean everyone else in the world is getting ready for Christmas so, why can't we. I have a tree decorating project that I have to get done before December and I decided to share the process with the internet so, here it is:

We are going to be making Plastic Spoon Flower Ornaments!!


Oh yeah, It's going to be a creative Christmas!!


Here is what you will need

  • Plastic Spoons (soup spoons and dinner spoons)
  • Candle (any type larger the flame the more intense the heat)
  • Scissors
  • Needle nose pliers
  • molding tool (we use a screwdriver for this)
  • aluminum foil
So, This isn't the easiest project to do, and honestly, you might get a little upset over the way things are looking but don't despair. These flowers come together no matter how the spoons melt and even if there are imperfections, remember, nature never made anything without flaws.

Some tips for when you start. Make sure not to hold the spoon directly in the flame. This will result in ugly holes in the plastic spoons. Start molding the sides of the spoon first, bending them and giving each spoon some natural looking petal folds. When attaching the petals together, it is easier to do so my setting the ends you are trying to meld together on fire and attaching them. 

Take a look at my video to get a full idea of what I mean.


Until the world revolves again...B

Follow me on Twitter, Instagram, Tumblr, and YouTube

Thursday, October 29, 2015

Turning Milk into Plastic-Another Easy Science Experiment

So today's science experiment is something so easy, that a cow could have made it itself if it wanted to. We are making plastic from milk.

Now for me, this was a really weird experiment. I thought "there is no way that is possible". Well, it sort of is to an extent. So here is the rundown:

You will need:


  • 1 cup of milk
  • 4 teaspoons of white vinegar (distilled is fine)
  • a pot for heating the milk (or heat it in the microwave: about 1:30 sec)
  • a mixing bowl
  • a strainer 
  • food coloring (if you want some colors)
So first start out heating the milk. You don't want it to boil, just enough to get it hot to the touch. From my research, it seems that doing this helps to start breaking down the whey in the milk before adding the vinegar. The heat also gives the casein protein a chance to form into a solid structure once the vinegar is added. 
After heating place the milk into a bowl and add any food coloring you wish. I used red in mine. Put in more than you think, It will take about 6 drops. (liquid color works best)
Mix that together and then add your 4 teaspoons of vinegar. Stir constantly for 1 minute.
The whey and casein will separate and then you are ready to strain.
Put the mixture through a strainer and run some water over the casein protein mixture. 

You are now ready to mold it any way you want. Once you have your desired shape. Let it sit for at least 6 hours or more (overnight is better) until it has hardened into a plastic or rock like substance.

And there you go. Milk has now been turned into plastic.

You can watch me make some below.


Until the world revolves again...B

Follow me on Twitter, Instagram, Tumblr, and YouTube

Thursday, October 22, 2015

Ghost Rockets For Halloween Fun!!--Science Experiments

As usual I am always going to find something fun to do. Of course that something would have to including lighting an object on fire. Don't worry, though, this is all in good scientific fun, and let's be honest, you are not a scientist unless you set something on fire!!!!

This btw is very kid friendly so don't shy away just because of the fire

SO this experiment is making little ghost rockets in honor of the season of Halloween that is quickly approaching. If it looks fun to you, then I have great news. It's a blast. I have never had more fun sending pieces of ash up into the air than I have doing this experiment. So here is everything you need.


  • Teabags (the thicker the bag the better it will work)
  • Sharpie or marks a lot
  • Scissors
  • matches or lighter
  • a plate (or solid non-flammable surface)
start by cutting open your tea bags where the fold meet at the top. Once cut, empty the package of all tea leaf material. (You dont want that stuff burning!!)

Time to draw on the faces, Use you sharpie to create whatever you like, spooky face or not. 

Once that is done place it on the plate or non-flammable surface and light it up.
Your Ghost should take off into the air and extinguish itself right before your eyes!!!

It is something to see to believe and it is so fun you will want to do it again and again. Trust me I know I am an adult man and I could not get enough of this!! Who needs tea anyway (unless you are a Brit)

To be fair, I did use my least favorite tea packages. Check out the video below for my instructions and a demonstration.


Until the World revolves again....B

For more of my crazy life and ideas, 
Follow me on Instagram, Twitter, Tumblr, and YouTube

Thursday, October 8, 2015

What the Heck's an Oobleck--Cool, Simple Science Experiement Lvl. 1

www.delawarechildrensmuseum.org
Alright little scientists, strap your goggles on and get ready to mix some chemicals because we are going full on Frankenstein today. Okay well maybe not that far but we sure are going to make one heck of a fun science experiment that you will feel like "ITS ALIVE"

So my challenge today was to create something called Oobleck. Now, you ask what is oobleck, is it some strange Norwegian pop band or something. Well, no. (that is a cool name idea though) Oobleck is a non-Newtonian fluid which just means that it is something that is neither a solid nor a liquid. It also happens to be the easiest thing that I have ever created.

The name comes from Dr. Seuss of course. In one of his stories, which I didn't bother to really read, a king or emperor of some sort wants to change the weather and in his attempts comes up with something called Oobleck, not solid and not liquid. Anyhoo, the stuff is really a big mess, but it is honestly a lot of fun. I have played with it since I was little and who would have thought it had a name like Oobleck. I sure didn't.

So the mixture can be both solid and liquid at certain points in its existence. If the mixture has even pressure, the force on it creates a solid mass and when something is not pushing against it, the mixture loses its structure and becomes viscous. It is really cool to work with and can really give any child no matter what age tons of fun.

Literally, I am almost 23 and I played with it for like an hour.

The best part is that it is easy to make and easy to clean. Watch the video below and make your own Oobleck, all you need is:


  • All Natural cornstarch/cornflour (depending on where you are from) 
  • Water (that's H20 for all you scientists)
  • A bit of food coloring (add color, mix different batches for a bit of color fun)

Hope you guys have fun making this...I sure did :D

Until the world revolves agian...B

Follow me on Twitter, Instagram, Tumblr, and Youtube.

Tuesday, September 8, 2015

My Life Has Been "Bonsai-ed"

So this Labor Day, I was fortunate to get to spend some time at the Shrimp and Petroleum Festival in Morgan City, Louisiana. This festival is really one of my favorites and maybe that has to do with it being in my hometown.

If you want to watch what went on this weekend, you can see it here, on my Youtube page.

While shopping around the crafts, I stumbled upon a booth selling bonsai trees. I have seen this setup before, over the many years that I walked the festival crafts. I think the love of plants comes from my grandmother, my mother's mother. She was an avid gardener and a bit of a chemist and botanist. Plants were her thing and if she was alive today, I am sure she would be procuring any and every plant that sprouted from the Earth. That was just the way she was.

So in seeing these bonsai trees, I decided I had to finally have one. I got a Juniper bonsai and it looks like this.
So the Juniper bonsai is from the pine family and unlike what everyone believes, they are not in fact tiny trees. They are normal sized plants that are made to look tiny.

The Juniper is a hardy tree that is good in almost any climate as long as it doesn't freeze. They also require little watering, only when the soil is noticeably dry. They are pretty much the perfect plant for people who like to be their own designer. My bonsai has already been through the process of wiring so it is up to me to keep it looking its best. What that means is, is that I have to water it (like it is raining) fertilize it, pinch off undesired shoots, and re-pot when it gets bigger. It is a pretty simple process and it happens to be a very fun adventure. For those that don't have the luxury of pre-wired bonsais, you will have to guide your tiny tree in the direction you want it to grow. Getting that desired look is done through thick wires that wrap around the trunk and branches. You have to do that before winter because after that, the tree goes dormant.

And just in case you are wondering, bonsais are not an indoor plant. Okay, the tropical versions of a bonsai are but the ones you normally see aren't. Right now, my little Juniperus is sitting on my window sill in the sun but it will soon be transferred outside to live its days like a true tree. If you ever get the chance to purchase a bonsai, I say do it. They are wonderful to look at and are really cool to decorate. Mine has a tiny bridge on it with fake water underneath.

See you when the world revolves again...B



      JUNIPER BONSAI CARE INSTRUCTIONS:

  • Re-pot: Every two or three years in early April. Sign to watch for include roots growing in circles in the bottom of the container or the soil level rising up out of the container.
  • Soil: A bonsai soil that drains well with a pH of 5.0 to 6.5
  • Fertilize: Miracid or Peters every tow to three weeks in spring and autumn. Switch brands to pick up trace elements your plants may be lacking.
  • Prune: Continually pinch overgrown buds to encourage secondary branching. heavy branches can be removed in the spring and if necessary in the fall.
  • Train: Anytime when warm. Remove all wire before winter.
  • Insects: Maples are relatively pest resistant, although one occasionally encounters a chewing insect which should be removed by hand
  • Insects/Diseases:  Spider mites and bagworms require immediate attention so hose off with water and then spray with Safer Soap. To prevent root-rot, drench the soil two or three-times-a-year with fungicide.
  • Culture: Cuttings can be taken in early spring and kept moist in perlite. Most species grow very slowly.
  • Watering: Do not over-water especially during the winter months as root-rot will kill the tree. Early morning watering is preferred and again if the tree dries out during the heat of the day.
  • Light: Prefers full sun.
  • Wintering: Junipers are very hardy, however, protect pots and roots in extreme temperatures.